Our company's Lubo brand chlorine dioxide disinfectant is a new type of oxidized disinfectant, which is high efficient, safety, fast, no residual and no side effects. It has been awarded as the only al grade high efficient safe sterilization disinfectant by WHO, which has been widely used in world developed countries. It is used as fungicide, disinfectant and bleacher in drinking water, food, pharmaceutical and industrial circulating water, etc.
All kinds of indexes are as follows:

Performance, usage and matters need attention:
It has the following characteristics:
A. broad spectrum, high efficient, high efficient;
B. Harmless on human and animal, no stimulation, no residual and no pollution;
C. Stable property.No inflammable and explosive
Lubo brand chlorine dioxide disinfectant can be used in multiple needs clean occasions. Such as:
It can disinfect, decoloration and deodorization for drinking water. It can also be used for industrial water treatment, industrial stripping sludge, oil quality improvement, flour curing performance improvement, etc. It has the characteristics like: broad spectrum, high efficient, safety, non-toxity and no residual. It has the functions like: algae removal, oxygenation, decontamination, decoloration, etc.
Transportation, storage and matters need attention:
A, This product is packed with avoid light PVC or polypropylene plastic barrel;
B, This product cannot be stored and transported together with acid, reducing matter and organic matter;
C, This product storage period is one year;
D, This product must be approved by activation rear before use;
E, After activation, it should be stored in the temperature below 18℃. Sealed;
F, After add activator, the solution's ph value should bellow 3.
Usage and dosage:
Chlorine dioxide is a high efficient sterilization disinfectant. The concrete use ratio is as follows:
Method of application and dosage in food industry

Method of application and dosage in healthcare industry

Method of application and dosage in hotel

Method of application and dosage in aquaculture industry

Method of application and dosage for tap water disinfection:
AAccording to the difference of water quality, the concentration is generally about l 0-40ml/m. Special water quality discretionary increase or decrease
BWhen add, the added amount is 1/3 -l/2 of the initial amount;
CUsage: Add solid activator in mother liquor. After 5~10 minutes, add a certain amount of water. Mix before use.
6, Method of application and dosage of industrial circulation water:
AAccording to the difference of water quality, the concentration is generally about 500-1000 ml/m. Special water quality discretionary increase or decrease
BWhen add, the added amount is 1/3 -l/2 of the initial amount;
CUsage: Add solid activator in mother liquor. After 5~10 minutes, add a certain amount of water.
7, Method of application and dosage of swimming pool disinfection:
According to the difference of water quality, the concentration is generally about 80-120ml/m3. Usage: Add solid activator in mother liquor. After 5~10 minutes, add a certain amount of water. Generally, one times three days.